TS080A4N5 | 8 inch 4 Wire Resistive Touch Screen Panel
nTS080A4N5 | 8 inch 4 Wire Resistive Touch Screen Panel Specification:
ntable width=”661″
ntbody
n
n colspan=”2″ width=”661″
nsongTouch Technologiessong
n
n
n
nConsuction
n4 Wire Resistive
n
n
nGlass Type
nFilm with Glass
n
n
nSizes Available
n1″~24″
n
n
nInput Method
n width=”468″Finger
nGloved hand
nPassive stylus
n
n
nActive Force
n≤ 45g~110g
n
n
nTouch Life
nMore than 5 million touches
n
n
nSurface Durability
n3H or 4H (per  ASTM D3363) based on technology requests
n
n
n colspan=”2″
nsongModel Informationsong
n
n
n
nModel Number
n
nTS080A4N5
n
n
n
nDiagonal Size
n8 inch
n
n
nActive Area
n161.8*121.8 mm
n
n
nOut Dimension
n183*141.1 mm
n
n
nCove Glass Thickness
n1.8mm
n
n
nLinearity Error
n≤1.5%
n
n
nResponse Time
n10ms
n
n
nSurface resistance
n200Ω~900Ω
n
n
n colspan=”2″
nsongOptical Specificationssong
n
n
n
nLight ansmission
n≥80%（Meet ASTM D1003）
n
n
nSurface Disposal
n width=”468″Anti-Glare coating (standard)
nAnti-Newton Ring
nGlare
n
n
nOperating Temperature
n-10°C ~ 60°C
n
n
nStorage Temperature
n-20°C ~ 70°C
n
n
nOperating Humidity
n10%~90% RH at 60°C, non-condensing
n
n
nStorage Humidity
n10%~90% RH at 40°C, non-condensing
n
n
n colspan=”2″
nsongElecical Specificationssong
n
n
n
nOperation Voltage
nTypical +DC 5V (3~7 V)
n
n
n rowspan=”2″ width=”193″Interface
n width=”468″FPC Pintch 0.5mm/1/2.54mm (connect with mainboard)
n
n
n width=”468″Via Conoller Board:
n1. Full Duplex USB 2.0 (Full Speed) Plug and play compatible
n2. Serial RS-232. Baud Rate: 9600, 8 Data Bits, 1 Stop Bit, No Parity
n
n
n width=”193″Current
n width=”468″5mA~25mA
n
n
n width=”193″Elecostatic Endurance
n width=”468″No abnormal appearance after 10kv, 100Ω, 250PF elecostatic used
n
n
n width=”193″Isolation Resistance
n width=”468″>20MΩ @ DC 25V
n
n
n width=”193″Resistance
n width=”468″300Ω< X Axis <900Ω, 200Ω< Y Axis <800Ω (according sizes)
n
n
n width=”193″Agency Approvals
n width=”468″CE, FCC, ROHS
n
n
n colspan=”2″ width=”661″
nsongReliability Testssong
n
n
n
n width=”193″Heat Cycle
n width=”468″70℃ /240 hrs
n
n
n width=”193″Cold Cycle
n width=”468″-40℃ /240 hrs
n
n
n width=”193″Thermal Cycle
n width=”468″-40℃ ~70℃ [60 min./cycle] *10 cycles
n
n
n colspan=”2″ width=”661″
nsongSupport Systemssong
n
n
n
n width=”193″Operation System
n width=”468″Windows ME/95/98/ NT4.0/XP/2000/Mac OS/Linux/ Dos/Android
n
n
nDrivers available
nWindows 2000/Windows XP/Win 7/ Win 8/Windows NT/Linux/Mac/Android
n
ntbody
ntable
nsong4 Wire Resistive Touch Screen Panel Detailssong:
nA 4-wire resistive touch screen panel comprises several thin layers, the most important of which are two ansparent elecically resistive layers facing each other with a thin gap between. The top layer (that which is touched) has a coating on the underside surface; just beneath it is a similar resistive layer on top of its subsate. One layer has conductive connections along its sides, the other along top and bottom. A voltage is applied to one layer, and sensed by the other. When an object, such as a fingertip or stylus tip, presses down onto the outer surface, the two layers touch to become connected at that point. The panel then behaves as a pair of voltage dividers, one axis at a time. By rapidly switching between each layer, the position of pressure on the screen can be detected.(This is also the reason why resistive touch screen have 1 touch point only)
nResistive touch panel is used in restaurants, factories and hospitals some indusial area due to its high tolerance for liquids and contaminants. The main benefit of resistive touch technology is its low cost. Additionally, as only sufficient pressure is necessary for the touch to be sensed, they may be used with gloves on, or by using anything rigid as a finger substitute. Disadvantages include the need to press down, and a risk of damage by sharp objects. Resistive touch screen panel also suffer from poorer conast, due to having additional reflections from the layers of material placed over the screen.(Resistive have Glare/ Anti-glare types as option)