Outdoor 27 Inch PCAP Touchscreen Monitor, 1500cd/m2, FHD, PCAP 10 Points, Cooling Fans System, Auto Light Sensor, Wide Temperature LCD
$950.00 Original price was: $950.00.$850.00Current price is: $850.00.
Multi installations as Open Frame/Closed Frame/ Embedded Touch Monitor
Projected Capacitive Touch screen, Multi Touch, 4mm Tempered Glass with Anti Glare. Surface IP65 Waterproof
LCD Resolution 1920*1080, Brightness 1500cd/m2 with Light Sensor, VGA/HDMI/DP, USB Touch, AC Power Supply 110V-240V
Category Outdoor PCAP Touch Monitors 27-65"
Outdoor 27 Inch PCAP Touchscreen Monitor, 1500cd/m2, FHD, PCAP 10 Points, Cooling Fans System, Auto Light Sensor, Wide Temperature LCD
| Model Number | OB270PTK5-1K5 | |
| Total parameter | Diagonal Size | 27 inch LCM a-Si TFT-LCD |
| Aspect Ratio | 16:9 | |
| Enclosure Color | Black | |
| Video Port | VGA/DVI/HDMI (Optional DP) | |
| Light Sensor | Automatic Light Sensor | |
| Monitor Dimension | 654.8×393.4×74.8mm | |
| VESA Dimension | 300×200mm | |
| Cooling Fans System | Work Princical | PWM Control |
| Number of Fans | According to Drawing | |
| Working Modes | Start-Up And Full-Speed Temperatures Can Be Set Freely | |
| Supporting Two Working Modes: Minimum Speed And Fan Shutdown | ||
| LCD Panel | Active Area(mm) | 599.6 × 338.2 (H×V) |
| Resolution | 1920(RGB)×1080 (FHD) | |
| Dot Pitch(mm) | 0.098×0.294 mm | |
| Viewing angle(Typ.)(CR≥10) | 89/89/89/89 (Min.)(CR≥10) | |
| Contrast (Typ.) (TM) | 1100 : 1 (Typ.) (TM) | |
| Brightness (typical) | 1500 cd/m² | |
| PCAP:1250 cd/m² | ||
| Response Time (Typ.)(Tr/Td) | 10 (Typ.)(G to G) ms | |
| Support Color | 16.7M | |
| Backlight MTBF(hr) | LED Backlight Min 50K hours | |
| Touchscreen | Touch Technology | PCAP Touch, Capacitive Touch Screen |
| Input Methods | Fingers | |
| Gloved hand | ||
| Passive stylus | ||
| Number of Touches | Single – Touch and 10 Multi Touch | |
| Glass Thickness | 4mm Tempered Glass | |
| Glass Cover Treatment | Anti Glare Treatment + Anti Reflective with Anti UV Film | |
| Light Transmission | 90% | |
| Response Time | 8 ms | |
| Life Span | Over 50 million touches in one location | |
| Positional Accuracy | ± 1.5mm | |
| Touch interface | USB | |
| RS232(Optional) | ||
| Operating System | Windows XP | |
| Windows 7 | ||
| Windows 8 | ||
| Linux | ||
| Android | ||
| Power | Power Consumption (W) | 125W |
| Input Voltage | 100-240 VAC, 50-60 Hz | |
| MTBF | 50000 hr at 25°C | |
| Environment | Operating Temp. | -20~60°C |
| Storage Temp. | -20~70°C | |
| Operating RH: | 20%~80% | |
| Storage RH: | 10%~90% | |
| Accessories | Included | 1 x Power Cable,1 x USB Cable, 1 x HDMI Cable, Rear Mount brackets |
| Optional | Wall Mount, Floor Stand/Trolley, Ceiling Mount, Table Stand | |
| Warranty | Warranty Period | 1 Year Free Warranty |
| Technical Support | Lifetime | |
| Fans Working Princical | ||
| After the power supply is normal, the POW light on the motherboard will light up. At this time, the speed controller begins to detect the current temperature and adjust the temperature according to the current settings. To adjust the fan speed within the temperature range, take the factory default temperature range of the speed regulator as an example. The range is L=30℃~H=50℃. When the current temperature is detected to be greater than or equal to 30℃, the speed controller adjusts the fan speed in a linear proportion. When the temperature rises, the fan speed will also increase. When the temperature is ≥50℃, the fan will turn to full speed. When the temperature drops to ≤27℃(L-3), the speed controller keeps the fan at minimum speed/or turns off the fan. |
||









